"STUDY ON THE INFLUENCE OF ELECTRON BEAM ON THE PHYSICOCHEMICAL PROPERTIES OF POLYAMIDE 6 "
DOI:
https://doi.org/10.31489/2021No2/35-39Keywords:
polyamide, electron beam, crystal structure, polymer, surface treatment.Abstract
"In this research work has been studied the effect of electron irradiation on the properties and structure of PA6 polyamide. The treatment was carried out with an industrial pulse accelerator in air with an irradiation dose in the range of 100-400 kGy. The processed polymer was also studied by Fourier-transform infrared spectroscopy, scanning electron microscopy, X-ray phase analysis and differential scanning calorimetry. According to the results of the study was known that electron beam treatment affects the crystal structure of polyamide-PA6, reducing its size. Also, it was found that the radiation dose of 200 kGy is optimal for preserving the crystal structure in comparison with 100, 300 and 400 kGy. "
References
"1 Raghu S., Archana K., Sharanappa C., et al. Electron beam and gamma ray irradiated polymer electrolyte films: Dielectric properties. Journal of Radiation Research and Applied Sciences, 2016, Vol. 9, pp. 117-124.
Leisen C., DrummerD. Infrared welding of cross-linkable polyamide 66. eXPRESS Polymer Letters,2016, Vol.10, No.10, pp. 849 – 859.
Mondal M., Gohs U., Wagenknecht U., Heinrich G. Additive free thermoplastic vulcanizates based on natural rubber. Macromol. Chem. Phys.2013, Vol.143, pp. 360-366.
Boldt R., Gohs U., Wagenknecht U., Stamm M. Effect of electron-induced reactive processing on morphology and structural properties of high-density polyethylene. Polymer 95, 2016, Vol.95, pp. 1-8.
Rakhadilov B.K., Sagdoldina Z.B., Ocheredko I.A., et al. Impact research of electron beam processing on the structure and properties of РА6 polyamide. Eurasian Physical Technical Journal. 2019, Vol.16, No.2, pp. 43-47.
Pramanik N.K., Haldar R.S., Bhardwaj Y.K. Radiation processing of Nylon 6 by e-beam for improved properties and performance. Radiat. Phys. Chem., 2009, Vol.78, pp.199-205.
Duxin Li, Ying Xie, Wen Juan Li, Yi Lan You, Xin Deng. Tribological and Mechanical Behaviors of Polyamide 6/Glass Fiber Composite Filled with Various Solid Lubricants. The Scientific World Journal, 2013, Vol.2013, pp. 1-9. doi: 10.1155/2013/320837.
Ovsik M., Stanek M., Senkerik V. Influence of electron beam irradiated on the surface properties of polyamide measured by micro-indentation test. MATEC Web of Conferences 125, 2017, Vol.125, pp. 1 – 4.
Meng H., Sui G. X., Xie G. Y., Yang R. Friction and wear behavior of carbon nanotubes reinforced polyamide 6 composites under dry sliding and water lubricated condition. Composites Science and Technology, 2009, Vol. 69, No.5, pp. 606-611.
Zhao R. G., Luo W. B., Xiao H. M., Wu G. Z. Water absorptivity and mechanical behaviors of PTFE/PA6 and PTFE/PA66 blends. Transactions of Nonferrous Metals Society of China, 2006, Vol. 16, Suppl. s2, pp. 498-503.
Chen Z., Li T., Yang Y., Liu X., Lv R. Mechanical and tribological properties of PA/PPS blends. Wear, 2004, Vol. 257, No. 7-8, pp. 696-707.
Burillo G., Adem E., Muñoz E., Vásquez M. Electron beam irradiated polyamide-6 at different temperatures. Radiat. Phys. Chem., 2013, Vol.84, pp.140-144.
Timus D.M., Cincu C., Bradley D.A., Craciun G., Mateescu E. Modification of some properties of polyamide-6 by electron beam induced grafting. Appl. Radiat. Isot., 2000, Vol.53, pp.937-944.
Pramanik N.K., Haldar R.S., Bhardwaj Y.K. Radiation processing of Nylon 6 by e-beam for improved properties and performance. Radiat. Phys. Chem., 2009, Vol.78, pp.199-205.
Dasgupta S., Hammond W.B., Goddard III W.A. Crystal structures and properties of nylon polymers from theory. Journal of American Chemical Society, 1996, Vol.118, No. 49, pp. 12291-12301.
Kim J.Y., Kim O.S., Kim S.H., Jeon H.Y. Effects of electron beam irradiation on poly(ethylene 2,6-naphthalate)/poly(ethylene terephthalate) blends. Polym.Eng.Sci.2004, Vol.44, pp. 395-405.
Pramanik N.K., Sarwar Alam M., Khanda R.K. Electron Beam Irradiation of Nylon 66: Characterization by IR Spectroscopy and Viscosity Studies. International Journal of Innovative Research in Science. 2015, Vol. 4, Issue 1, pp. 18547-18555. doi: 10.15680/IJIRSET.2015.0401019.
Makuuchi K., Cheng S. Radiation Processing of Polymer Materials and Its Industrial Applications. New Jersey, 2012, 444 p.
Shifeng Zhu, Meiwu Shi, Meifang Zhu. Effects of Electron-Beam Irradiation Crosslinking on PA6 Fibers. Fibers and Polymers, 2013, Vol.14, No.4, pp. 525-529.
Sibilia J.P. A Guide to Material Characterization and Chemical Analysis. New York, 1996, 318 p.
Shailesh M.K., Kumar A. Radiation-induced grafting of vinylbenzyl trimethyl ammonium chloride onto nylon-6 fabric. Radiat. Phys. Chem., 2007, Vol.76, pp. 901 – 906.
Nalwa H.S. Ferroelectric Polymers, New York, 1995, 895p."
