РАСЧЕТ СТРУКТУРНЫХ ПАРАМЕТРОВ И КОНСТРУКЦИЯ ЗАЩИТНОГО ЭКРАНА ДЛЯ РЕНТГЕНОВОЙ СИСТЕМЫ

Авторы

  • И.В. Плотникова
  • Л.А. Редько
  • С.С. Баус
  • О. Стары
  • С.С. Касымов
  • А.С. Балтабеков

DOI:

https://doi.org/10.31489/2020No1/138-144

Ключевые слова:

модель, контроль, дизайн, рентгеновское излучение, характеристика

Аннотация

"Необходимость проведения расчета радиационной защиты системы излучения есть основа, в котором осуществляются диагностические, проектировочные или сборочные мероприятия в рамках неразрушающего контроля. В статье дан анализ конструктивных особенностей рентгеновских систем и их технических характеристик в зависимости от условий эксплуатаций. Приведены зависимости распределения рентгеновского излучения и напряжения от толщины защитного экрана. Представлен расчет толщины защитного экрана, который позволит проектировать корпус защитного экрана рентгеновской системы. Приведенные исследования облегчат работу специалистов по разработке новых модификаций рентгеновских систем. "

Библиографические ссылки

"1 Antropov A.P., Ragutkin A.V., Melnikov P.V., Luchnikov P.A., Zaitsev N.K. Composite material for optical oxygen sensor. IOP Conference Series: Materials Science and Engineering. 2018, Vol. 289.

Seynaeve P.C., Broos J.I. The history of tomography. Journal Belge de Radiologie. 1995, Vol. 78, No.5, pp. 284 – 288.

Kowaluk T., Woźniak A. Influence of measurement parameters settings on the results of the CT measurement. Advances in Intelligent Systems and Computing. 2018, Vol. 644, pp. 607-612.

Stock S.R. Micro Computed Tomography: Methodology and Applications. Boca Raton, FLCRC Press, Taylor & Francis Group. 2009, 364 p. doi: 10.1201/9781420058772.

Körner M., Weber C.H., Wirth S., et al. Advances in digital radiography: Physical principles and system overview. Radio Graphics. 2007, Vol. 27, No 3, pp. 675 – 686. doi: 10.1148/rg.273065075.

Hsieh J. Computed tomography: principles, design, artifacts, and recent advances. Bellingham. SPIE Press; Hoboken: Wiley Interscience. 2009, 556 p.

Dobbins J.T., Godfrey D.J. Digital x-ray tomosynthesis: current state of the art and clinical potential. Physics in Medicine and Biology. 2003, Vol. 48, No 19, pp. 65 – 106. doi: 10.1088/0031-9155/48/19/R01.

Gomi T., Hirano H., Nakajima M., Umeda T. X-ray digital linear tomosynthesis imaging. Journal of Biomedical Science and Engineering. 2011, No 4, pp. 443 – 453.

Blinov A.B., Blinov N.N. Radiation Load in X-Ray Computer Tomography. Biomedical Engineering. 2011, Vol. 44, No.5, pp. 180 – 181.

Baus S.S., Redko L.A., Yanushevskaya M.N. X-ray Tomographic System Behavior Prediction Based on a Mathematical Model. IOP Conference Series: Materials Science and Engineering. 2016, Vol. 189, No.1, pp. 1 – 5.

Dunsmuir J., Bennett S., Fareria L., Mingino A., M. Sansone M. X-ray microtomographic imaging and analysis for basic research. Powder Diffraction. 2006, Vol. 21, No.2, pp.125 – 131.

Landis E.N., Keane D.T. X-ray microtomography, Materials Characterization. 2010, Vol. 61, No.12, pp. 1305 – 1316.

Gavrilin A., Moyzes B., Kuvshinov K., Vedyashkin M., Surzhikova O. Determination of optimal milling modes by means of shock-vibration load reduction on tool and peak-factor equipment. Materials Science Forum. 2019, Vol. 942, pp. 87 – 96.

Dorr A., Sled J.G., Kabani N. Three-dimensional cerebral vasculature of the CBA mouse brain: A magnetic resonance imaging and micro computed tomography study. Neuroimage. 2007, Vol. 35, No 4, pp.1409-423 DOI: 10.1016/j.neuroimage.2006.12.040

Kowaluk T., Woźniak A. Influence of measurement parameters settings on the results of the CT measurement, Advances in Intelligent Systems and Computing. 2018, Vol. 644, pp. 607 – 612.

Plotnikova I.V., Chicherina N.V., Bays S.S., Bildanov R.G., Stary O. The selection criteria elements of X-ray optics system, IOP Conference Series: Materials Science and Engineering, 2018, Vol. 289, No.1, pp.012029.

Li. Y. Mathematical models for radiographic exposure and their application. NDT & E International. 1999, Vol. 25, No. 4–5, pp. 183–189.

Dunsmuir J.H., Bennett S., Fareria L., Mingino A., Sansone S. X-ray microtomographic imaging and analysis for basic research. Powder Diffraction. 2006, Vol. 21, No. 2, pp.125-131, doi: 10.1154/1.2204956

Tsai C.-L., Tsai M.-J. Significance of weld undercut in design of fillet welded T-joints, Welding Research Supplement. 1984, Vol. 2, pp.64 – 70.

Faraz A. Effect of Welding Parameters on the Structural Performance of Fusion Welded Extruded and Injection Molded HDPE Joints. Journal of Space technology. 2014, Vol. 1, pp. 114 – 119.

Lai H.S. Effect of defects on the burst failure of butt fusion welded polyethylene pipes. Journal of Mechanical Science and Technology. 2016, Vol. 30, pp. 1973–1981.

Barber P., Atkinson J.R. The use of tensile tests to determine the optimum conditions for butt fusion welding certain grades of polyethylene, polybutene-I and polypropylene pipes. Journal of materials science. 1974, Vol. 9, pp. 1456–1466.

Luchnikov P.A., Vetrova V.V., Zubkov N.P., Surzhikova, O.A. Chernova, N.I. Deformable Polymer Dielectric Films in Phase Light Modulators. IOP Conference Series: Materials Science and Engineering. 2017, Vol. 189, pp. 012027.

Luchnikov P.A. Defect formation in fluoropolymer films at their condensation from a gas phase. IOP Conference Series: Materials Science and Engineering IOP. 2018, Vol. 289, pp. 012037.

Yurov V.M., Goncharenko V.I., Vasiliev S.L., Dmitriev S.A., Yurgenson S.A. Experimental study of changes in the structure of polymer material by computational x-ray tomography. Eurasian Physical Technical Journal. 2019, Vol.16, No.2 (32) pp. 26 – 30.

Yurov V.M., Goncharenko V.I., Vasiliev S.L., Dmitriev S.A., Yurgenson S.A. X-ray computed tomography – based analysis of impact damage propagation in composition materials. Eurasian Physical Technical Journal, 2019, Vol.16, No.2 (32) pp. 31 – 35.

Surzhikova O. Power supply of remote and almost inaccessible settlements. IOP Conf. Series: Materials Science and Engineering IOP. 2015, Vol. 81, No. 1, pp. 012098.

Surzhikov A.P., Pritulov A.M., Lysenko E.N., Sokolovskii A.N., Vlasov V.A., Vasendina E.A. Dependence of lithium-zinc ferrospinel phase composition on the duration of synthesis in an accelerated electron beam. Journal of Thermal Analysis and Calorimetry. 2012, Vol. 110, No 2, pp. 733 – 738.

"

Загрузки

Как цитировать

Плотникова I., Редько L., Баус S., Стары O., Касымов S., & Балтабеков A. (2020). РАСЧЕТ СТРУКТУРНЫХ ПАРАМЕТРОВ И КОНСТРУКЦИЯ ЗАЩИТНОГО ЭКРАНА ДЛЯ РЕНТГЕНОВОЙ СИСТЕМЫ. Eurasian Physical Technical Journal, 17(1(33), 138–144. https://doi.org/10.31489/2020No1/138-144

Выпуск

Раздел

Инженерия (техническая физика)

Наиболее читаемые статьи этого автора (авторов)