LOCAL APPROACH TO IMPROVE THE AERODYNAMIC CHARACTERISTICS OF THE FINAL DRYING PROCESS
DOI:
https://doi.org/10.31489/2022No2/65-70Keywords:
coolant supply system, local aerodynamic characteristicsAbstract
Energy-saving technologies are widely used in various technological processes, in particular for the final drying of plant waste. The purpose of the study is to ensure optimal flow distributions and making targeted changes in the design of the coolant supply system based on measurements of local velocities at characteristic points in space, using the methods of hot-wire anemometry. The measurements were carried out in stages and covered eight modifications of the installation. Based on the analysis of the data obtained, specific measures were developed to improve the design of the coolant supply system.
References
Bingxing Wang, Zhixue Liu, Bo Zhang, Zhaodong Wang, Guodong Wang. Heat Transfer Characteristic of Slit Nozzle Impingement on High-temperature Plate Surface. ISIJ International. 2019, Vol. 59, Issue 5, pp. 900-907 https://doi.org/10.2355/isijinternational.ISIJINT-2018-576
Suprun T.T. Local approach for evaluating heat transfer of prismatic elements on a flat surface. Eurasian phys. tech. j. 2021, Vol.18, No. 3 (37), pp. 43-47. doi: 10.31489/2021No3/43-47.
Suprun T. Physical modeling the unsteady flow with wakes. Eurasian phys. tech. j. 2017, Vol.14, No. 2(28), pp. 113 - 119. http://phtj.ksu.kz/files_phtj/2018.01/19.pdf
Bradshaw P. An Introduction to Turbulence and its Measurement. Mir, Moscow, 1974, 345 p. [in Russian]
Epik E.Ya., Suprun T.T. Impulse and heat transport processes at bypass transition. Eurasian phys. tech. j. 2007, Vol.4, No.1(7), pp. 52-57
Dyban E.P., Mazur A.I. Convective heat transfer in jet stream flow of bodies. Naukova Dumka, Kiev,1982, 303 p. [in Russian]
