DETERMINATION OF THE ENERGY RELEASE DISTRIBUTION  AND TEMPERATURE IN THE IRT-4M NUCLEAR FUEL WHEN CHANGING THE CONFIGURATION OF THE CONTROL AND PROTECTION SYSTEM CHANNELS IN THE WWR-SM REACTOR

S.A. Baytelesov; D.P. Tadjibaev; T.B. Fayziyev; F.R. Kungurov; Sh.A. Alikulov

doi:10.31489/2025N3/66-74

Authors

DOI:

https://doi.org/10.31489/2025N3/66-74

Keywords:

fuel assembly, neutron-physical, thermal-hydraulic calculation, horizontal and vertical channels, reactor core, burnup

Abstract

The objective of this work is to determine the temperature distribution in the IRT-4M type fuel assembly with fuel 19.75% enriched in ²³⁵U in the core of the WWR-SM reactor for the case of a square tube with rounded edges and a round hole in the center and the case of a round tube. In the case of installing a round tube inside the fuel assembly instead of a square tube with rounded edges and a round hole in the center, the volume of water in this space increases. On the one hand, this leads to improved heat removal, since the volume of cooling water increases, and on the other hand, an increase in the volume of water leads to an increase in thermal neutrons on this side of the fuel element, and this, in turn, leads to an increase in energy release. To determine these changes, we performed neutron-physical and thermal-hydraulic calculations for a channel with a square tube with rounded edges and a round hole in the center and for a round tube. It has been determined that replacing a square tube with rounded edges and a round hole in the center with a round tube as a guide for installing a compensating control rod will not affect the nuclear safety of the WWR-SM reactor operation.

References

Honghao Yu, Jiejin Cai, Sihong He, Xuezhong Li. (2021) Analysis of neutron physics and thermal hydraulics for fuel assembly of small modular reactor loaded with ATFs. Annals of Nuclear Energy, 152, 107957. https://doi.org/10. 1016/j.anucene.2020.107957 DOI: https://doi.org/10.1016/j.anucene.2020.107957

Malmir H., Vosoughi N., Zahedinejad E. (2010) Development of a 2-D 2-group neutron noise simulator for hexagonal geometries. Annals of Nuclear Energy, 37(8), 1089 – 1100. https://doi:10.1016/j.anucene.2010.04.007 DOI: https://doi.org/10.1016/j.anucene.2010.04.007

Sidi-Ali K., Medouri E.M., Ailem D., Mazidi S. (2023) Neutronic calculations and thermalhydraulic application using CFD for the nuclear research reactor NUR at steady state mode. Progress in Nuclear Energy, 159, 104640. https://doi.org/10.1016/j.pnucene.2023.104640 DOI: https://doi.org/10.1016/j.pnucene.2023.104640

Alzaben Y, Sanchez-Espinoza V.H., Stieglitz R. (2019) Analysis of a control rod ejection accident in a boron-free small modular reactor with coupled neutronics/thermal-hydraulics code. Annals of Nuclear Energy, 134, 114 – 124. https://doi.org/10.1016/j.anucene.2019.06.009 DOI: https://doi.org/10.1016/j.anucene.2019.06.009

Erfaninia Ali, Hedayat Afshin, Mirvakili S.M. (2017) Nematollahi M.R. Neutronic-thermal hydraulic coupling analysis of the fuel channel of a new generation of the small modular pressurized water reactor including hexagonal and square fuel assemblies using MCNP and CFX. Progress in Nuclear Energy, 98, 213 – 227. https://doi.org/10.1016/ j.pnucene.2017.03.025 DOI: https://doi.org/10.1016/j.pnucene.2017.03.025

Xiaobei Xu, Zhouyu Liu, Hongchun Wu, Liangzhi Cao. (2022) Neutronics/thermal-hydraulics/fuel-performance coupling for light water reactors and its application to accident tolerant fuel. Annals of Nuclear Energy, 166, 108809. https://doi.org/10.1016/j.anucene.2021.108809 DOI: https://doi.org/10.1016/j.anucene.2021.108809

Yesbayev A.N., Yessenbayeva G.A.,Ramazanov M.I. (2019) Investigation of the model for the essentially loaded heat equation. Eurasian Physical Technical Journal, 16 , 1(31). https://doi.org/10.31489/2019No1/113-120 DOI: https://doi.org/10.31489/2019No1/121-128

Shaimerdenov A.A., Shamanin I.V., Pribaturin N.A., Gizatulin Sh.Kh., Koltochnik S.N., Chekushina L.V. (2018) Thermophysical Justification for Conducting Lifetime Tests of Experimental Fuel Assemblies WWR-KN in the WWR-K Reactor. Intern. Scientific Journal for Alternative Energy and Ecology, https://doi.org/10.15518/isjaee.2018.10-12.023-033

Yusupov D.D., Abdullaev R.A. Research Nuclear Facility of Uzbekistan. [in Russian] Available at: file:///D:/Statya_2023_2024_2025/Statya_2025_Eura_Asian/71.pdf

Arkhangelsky N.V. (1985) IRTNOW program for two-dimensional calculation of neutron flux densities in a two-group diffusion approximation. Description of the application, Moscow, IAE. Available at: https://rusneb.ru/catalog/ 000200_000018_rc_682884/

Alikulov Sh.A., Baytelesov S.A., Boltaboev A.F., Osmanov B.S., Salikhbaev U.S. (2014) Experimental Studies of Spent Fuel Burn-up in the WWR-SM Reactor. Nuclear Engineering and Design, 277, 163 –165. https://doi.org/10.1016/j.nucengdes.2014.06.020. DOI: https://doi.org/10.1016/j.nucengdes.2014.06.020

Baitelesov S.A., Dosimbaev A.A., Kungurov F.R., Salikhbaev U.S. (2008) Neutron-physical and thermal-hydraulic calculations of VVR-SM fuel assemblies from highly and low-enriched uranium. Atomic Energy, 104, 5. Available at: https://j-atomicenergy.ru/index.php/ae/article/view/1719 DOI: https://doi.org/10.1007/s10512-008-9039-4

Taliev A.V. (2006) ASTRA modernized program for calculation of the thermal mode of the fuel assemblies of research reactors with tubular coaxial fuel elements. Available at: https://inis.iaea.org/records/m4cyv-40x35/

Baytelesov S.A., Kungurov F.R., Yuldashev B.S. (2020) Thermal-Hydraulic Calculations of the WWR-SM Research Reactor. Nuclear Physics and Atomic Energy, 21(2), 152–156. https://doi.org/10.15407/jnpae2020.02.152 DOI: https://doi.org/10.15407/jnpae2020.02.152

Woodruff W.L., Warinner D.K., Matos J.E. (1992) Consequence Analysis Method. IAEA-TecDoc 643, Research Reactor Core Conversion Guidebook. 2, Analysis, Appendices D; Radiological Consequence Analysis. RERTR Program, Argonne National Laboratory, Argonne, Illinois, United States of America. Available at: https://www-pub.iaea.org/MTCD/Publications/PDF/te_643v2_prn.pdf

Li Dong Huang (2009) Evaluation Of Onset Of Nucleate Boiling Models. ECI International Conference on Boiling Heat Transfer. Available at: https://inis.iaea.org/records/c8grd-f8556

DETERMINATION OF THE ENERGY RELEASE DISTRIBUTION AND TEMPERATURE IN THE IRT-4M NUCLEAR FUEL WHEN CHANGING THE CONFIGURATION OF THE CONTROL AND PROTECTION SYSTEM CHANNELS IN THE WWR-SM REACTOR