THE HARDNESS OF HIGH-ENTROPY COATINGS OBTAINED BY THE METHOD OF MECHANICAL ALLOYING

THE HARDNESS OF HIGH-ENTROPY COATINGS OBTAINED BY THE METHOD OF MECHANICAL ALLOYING

Authors

DOI:

https://doi.org/10.31489/2021No4/29-36

Keywords:

microhardness, high-entropy coating, steel, surface energy, destruction of the coating, nanostructure

Abstract

The article shows that the hardness of most stainless steels is 2-3 times less than high-entropy coatings, which shows the prospect of their use as parts of various industrial structures. Microhardness of metallic glasses, which have a defect-free base, and do not differ from high-entropy coatings. In the article, an equation is obtained that shows that the destruction of the coating is proportional to the surface energy and inversely proportional to the Gibbs energy. For stainless steels, the surface energy is about the same as for high-entropy coatings. The Gibbs energy of high-entropy coatings is 2 times higher than that of stainless steels, which leads to a high hardness of high-entropy coatings, which is observed experimentally.

References

"1 Guchenko S.A, Zavatskaya O.N., Yurov V.M., Kasymov S.S., Laurinas V.Ch. Fractal structure of multi-element coating. Eurasian Physical Technical Journal. 2018, Vol. 15, No.1 (29), pp. 8-17.

Eremin E.N., Yurov V.M., Guchenko S.A. Wear resistance and tribological properties of high entropy coatings CrNiTiZrCu. Eurasian Physical Technical Journal. 2020, Vol.17, No.1 (33), pp. 13-18.

Yurov V.М., Guchenko S., Salkeeva A.К., Kusenova A.S. Nitrogening hydraulic cylinder rods. Eurasian Physical Technical Journal. 2020, Vol.17, No.1 (33), pp. 25-30.

Yeh J.-W., Chen S.-K., Lin S.-J., et al. Nanostructured High-Entropy Alloys with Multiple Principle Elements: Novel Alloy Design Concepts and Outcomes. Advanced Engineering Materials, 2004, Vol. 6, No. 8, pp. 299-303.

Yeh J.W., Chen Y.L., Lin S.J. High-entropy alloys – a new era of exploitation. Materials Science Forum. 2007, Vol. 560. – P. 1-9.

Wang Y.P., Li B.Sh., Heng Zh.F. Solid Solution or Intermetallics in a High-Entropy Alloy. Advanced Engineering Materials, 2009, Vol. 11, No. 8, pp. 641-644.

Vyas A., Menghania J., Natub H. Metallurgical and Mechanical Properties of Laser Cladded AlFeCu CrCoNi-WC10.High Entropy Alloy Coating. IJE TRANSACTIONS A: Basics. 2020, Vol. 33, No. 7, pp. 1397-1402

Yanjiao Ma, Yuan Ma, Qingsong Wang et al. High-entropy energy materials: challenges and new opportunities. Energy Environ. Sci., 2021, Vol. 14, pp. 2883–2905.

Sharma A. High Entropy Alloy Coatings and Technology. Coatings, 2021, Vol. 11, pp. 372-388.

Meghwal A., Anupam A., Murty B.S., Berndt C.C., Kottada R.S., Ming Ang A.S. Thermal Spray High-Entropy Alloy Coatings: A Review. Journal of Thermal Spray Technology, 2020, pp. 1-38.

Postolnyi B., Buranich V., Smyrnova K. et al. .Multilayer and high-entropy alloy-based protective coatings for solving the issue of critical raw materials in the aerospace industry. IOP Conf. Series: Materials Science and Engineering, 2021, 1024, pp. 012009

Cheng-Yu He, Xiao-Li Qiu, Dong-Mei Yu et al. Greatly enhanced solar absorption via high entropy ceramic AlCrTaTiZrN based solar selective absorber coatings. Journal of Materiomics. 2021, Vol. 7, pp. 460-469.

Lewin E. Multi-component and high-entropy nitride coatings. A promising field in need of a novel approach. Journal of Applied Physics, 2020, Vol. 127, pp. 220901.

Mishra A. Friction Stir Welding/Processing of High Entropy Alloys (HEAs). Welding Technology Review, 2021, Vol. 93(1), pp. 27-33.

Xiang H., Xing Y., Dai F., Wang H. et al. High-entropy ceramics: Present status, challenges, and a look forward. Journal of Advanced Ceramics. 2021, Vol. 10(3), pp. 385–441.

Yurov V.M., Guchenko S.A., Tvardovsky A.N. Two targets for magnetron deposition of high-entropy coatings. Trends in the development of science and education, 2020, No. 60(1), pp. 28-34.

Pogrebnyak A.D., Bagdasaryan A.A. Pink A.V., Dyadyura K.A. Multicomponent nanocomposite coatings with adaptive behavior in surface engineering. Uspekhi fizicheskikh nauk. 2017, Vol. 187, No. 6, pp. 629-652.

Yurov V.M., Guchenko S.A., Makhanov K.M. Atomic force microscopy of high-entropy coatings. International Journal of Applied and Fundamental Research. 2020, No. 4, pp. 62-67.

Cheng Y.Q., Ma E. Atomic-level structure and structure–property relationship in metallic glasses. Progress in Materials Science. 2011, Vol. 56, pp. 379–473.

Povolotskiy D.Ya., Gudim Yu.A. Stainless steel production. – Chelyabinsk, 1998. - 236 p.

Yurov V.M., Guchenko S.A. Electrical conductivity of seven-atom high-entropy alloys. Interuniversity scientific congress ""Higher school: scientific research"", 2019, Vol. 1, pp. 142-148.

Yurov V.M., Guchenko S.A., Zavatskaya O.N. Structure and surface tension of composite coatings. Bulletin of KSU. Physics, 2012, No. 1 (65), pp. 45-53.

"

Downloads

How to Cite

Yurov, V., & Makhanov, K. (2021). THE HARDNESS OF HIGH-ENTROPY COATINGS OBTAINED BY THE METHOD OF MECHANICAL ALLOYING. Eurasian Physical Technical Journal, 18(4(38), 29–36. https://doi.org/10.31489/2021No4/29-36

Issue

Section

Materials science
Loading...