Тұтқырлығы жоғары пасталарды экструзиялау процесін сандық модельдеу
DOI:
https://doi.org/10.31489/2024No1/114-123Кілт сөздер:
экструзия, поршеньді дозатор, күміс паста, тұтқырлық, терпинеолАңдатпа
Тұтқырлығы жоғары пасталарды экструзиялау процесін сандық модельдеу
Мақалада поршеньді дозатор көмегімен пастаны экструзиялау процесіне теориялық шолу ұсынылған. Паста-терпинеол мен күміс бөлшектерінің ұнтағының жоғары тұтқыр суспензиясы болып табылады. Сандық модельдеу нәтижесінде пастаның тұрақты ағынында күміс бөлшектерінің таралуы алынған. Поршеньдегі артық қысым және поршень жылдамдығына байланысты жолдың тиімді ені алынады. Модельдеу экструзия процесіне ең үлкен әсер пастаның тұтқырлығы екенін көрсетті. Алынған тәуелділіктерді пайдалану пастаны экструзиялау процесін басқаруға мүмкіндік береді.
References
Divakaran N., Das J.P., PV A.K., Mohanty S., Ramadoss A., Nayak S.K. Comprehensive review on various additive manufacturing techniques and its implementation in electronic devices. Journal of Manufacturing Systems, 2022, Vol. 62, pp. 477 – 502. https://doi.org/10.1016/j.jmsy.2022.01.002
Hassan K., Nine M.J., Tung T.T., Stanley N., Yap P.L., Rastin H., et al. Functional inks and extrusion-based 3D printing of 2D materials: a review of current research and applications. Nanoscale, 2020, Vol. 12, No. 37, pp.19007 – 19042. https://doi.org/10.1039/D0NR04933F
Tan H.W., Choong Y.Y.C., Kuo C.N., Low H.Y., Chua C.K. 3D printed electronics: Processes, materials and future trends. Progress in Materials Science, 2022, Vol. 127, p. 100945. https://doi.org/10.1016/j.pmatsci.2022.100945
Rida A., Yang L., Tentzeris M.M. Design and characterization of novel paper-based inkjet-printed UHF antennas for RFID and sensing applications. In IEEE Antennas and Propagation Society International Symposium. HI, USA, 2007, pp. 2749 – 2752. https://doi.org/10.1109/APS.2007.4396104
Cook B.S., Mariotti C., Cooper J.R., Revier D., Tehrani B.K., Aluigi L., Roselli L., Tentzeris, M.M. Inkjet- printed, vertically-integrated, high-performance inductors and transformers on flexible LCP substrate. In 2014 IEE MTT-S International Microwave Symposium (IMS2014), 2014, pp. 1 – 4. https://doi.org/10.1109/MWSYM.2014.6848575
Kim S. Inkjet-Printed Electronics on Paper for RF Identification (RFID) and Sensing. Electronics, 2020, Vol.9, No. 10, pp. 1636. https://doi.org/10.3390/electronics9101636
Tentzeris M.M., Rida A., Traille A., Lee H., Lakafosis V., Vyas R. Inkjet-printed paper/polymer-based RFID and Wireless Sensor Nodes: The final step to bridge cognitive intelligence, nanotechnology and RF? XXXth URSI General Assembly and Scientific Symposium. Istanbul, Turkey, 2011, pp. 1 – 4. https://doi.org/10.1109/URSIGASS.2011.6050690
Cook B.S., Fang Y., Kim S., Le T., Goodwin W.B., Sandhage K.H. Inkjet catalyst printing and electroless copper deposition for low-cost patterned microwave passive devices on paper. Electronic Materials Letters, 2013, Vol.9, pp. 669 – 676. https://doi.org/10.1007/s13391-013-3027-0
Abutarboush H.F., Shamim A. Wide frequency independently controlled dual‐band inkjet‐printed antenna. IET Microwaves, Antennas & Propagation, 2014, Vol. 8, No. 1, pp. 52 – 56. https://doi.org/10.1049/iet-map.2013.0229
Kim S., Cook B.S., Le T., Cooper J., Lee H., Lakafosis V. Inkjet-printed antennas, sensors and circuits on paper substrate. IET Microwaves, Antennas and Propagation, 2013, Vol. 7 No. 10, pp. 858 – 668. https://doi.org/10.1049/iet-map.2012.0685
Pongpaibool P., Wallada W., Siwamogsatham S. A Thickened-and-Widened Feed Dipole Antenna with an Inductive Matching Loop for a Printed UHF RFID Tag. In National Electronics and Computer Technology Center. Sapporo, Japan, 2014, pp. 2092 – 2096. https://doi.org/10.1109/InfoSEEE.2014.6946293
Shaker G., Safavi-Naeini S., Sangary N., Tentzeris M.M. Inkjet Printing of Ultrawideband (UWB) Antennas on Paper-Based Substrates. IEEE Antennas and wireless propagation letters, 2011, Vol. 10, pp. 111 –114. https://doi.org/10.1109/LAWP.2011.2106754
Haerinia M., Noghanian S. Design of Hybrid Wireless Power Transfer and Dual Ultrahigh-Frequency Antenna System. Proceeding of the URSI International Symposium on Electromagnetic Theory (EMTS). California, USA, 2019, 4 p. https://doi.org/10.23919/URSI-EMTS.2019.8931514
Haerinia M., Noghanian S. A Printed Wearable Dual-Band Antenna for Wireless Power Transfer. Sensors, 2019, Vol. 19, No. 7, p. 1732. https://doi.org/10.3390/s19071732
Shadid R., Haerinia M., Noghanian S. Study of Rotation and Bending Effects on a Flexible Hybrid Implanted Power Transfer and Wire-less Antenna System. Sensors, 2020, Vol. 20, No. 5, p. 1368. https://doi.org/10.3390/s20051368
Trufanova, N.S., Artishchev S.A., Ragimov E.R., Loschilov A.G., Malyshenko A.M.. Technique for extraction of electric frequency parameters of conductive ink. Journal of Physics: Conference Series, 2022, Vol. 2291, No. 1, p. 012015. https://doi.org/10.1088/1742-6596/2291/1/012015
Kreit E., Steffen T., Aga R., Bartsch C., Wu B.I., Heckman E. Printed multilayer conformal x-band antenna array. Flexible and Printed Electronics, 2017, Vol. 2, No. 4, p. 045009. https://doi.org/10.1088/2058-8585/aa940b
Correia V., Mitra K.Y., Castro H., Rocha J.G., Sowade E., Baumann R.R., Lanceros-Mendez S. Design and fabrication of multilayer inkjet-printed passive components for printed electronics circuit development. Journal of Manufacturing Processes, 2018, Vol. 31, pp. 364 – 371. https://doi.org/10.1016/j.jmapro.2017.11.016
Hardin J.O., Grabowski C.A., Lucas M., Durstock M.F., Berrigan J.D. All-printed multilayer high voltage capacitors with integrated processing feedback. Additive Manufacturing, 2019, Vol. 27, pp. 327 – 333. https://doi.org/10.1016/j.addma.2019.02.011
Kwon K.S., Rahman M.K., Phung T.H., Hoath S.D., Jeong S., Kim J.S. Review of digital printing technologies for electronic materials. Flexible and Printed Electronics, 2020, Vol. 5, No. 4, p. 043003. https://doi.org/10.1088/2058-8585/abc8ca
Li W., Ghazanfari A., Leu M.C., Landers R.G. Extrusion-on-demand methods for high solids loading ceramic paste in freeform extrusion fabrication. Virtual and Physical Prototyping, 2017, Vol. 12, No. 3, pp. 193 – 205. https://doi.org/10.1080/17452759.2017.1312735
Chen X.B., Kai J. Modeling of positive-displacement fluid dispensing processes. IEEE Transactions on Electronics Packaging Manufacturing, 2004, Vol. 27, No. 3, pp. 157 – 163. https://doi.org/10.1109/TEPM.2004.843083
Bruneaux J., Therriault D., Heuzey M.C. Micro-extrusion of organic inks for direct-write assembly. Journal of Micromechanics and Microengineering, 2008, Vol. 18, No. 11, p. 115020. https://doi.org/10.1088/0960-1317/18/11/115020
COMSOL. The Level Set Method. https://www.comsol.com/forum/thread/attachment/37361/The-level-set-methodfrom-MEMS-Module-5198.pdf.
Besagni G., Varallo N., Mereu R. Computational Fluid Dynamics Modelling of Two-Phase Bubble Columns: A Comprehensive Review. Fluids, 2023, Vol. 8, No. 3, p. 91. https://doi.org/10.3390/fluids8030091
Schmidt G.A., Lin Y.J., Xu Y., Wang D., Yilmaz G., Turng L.S. Viscosity characterization and flow simulation and visualization of polytetrafluoroethylene paste extrusion using a green and biofriendly lubricant. Polymer Engineering & Science, 2021, Vol. 61, No. 4, pp. 1050 – 1065. https://doi.org/10.1002/pen.25632
Shen F., Dixit M.B., Zaman W., Hortance N., Rogers B., Hatzell, K.B. Composite electrode ink formulation for all solid-state batteries. Journal of The Electrochemical Society, 2019, Vol. 166, No. 14, p. A3182. https://doi.org/10.1149/2.0141914jes
Slistan-Grijalva A., Herrera-Urbina R., Rivas-Silva J.F., Ávalos-Borja M., Castillón-Barraza F.F., Posada-Amarillas A. Classical theoretical characterization of the surface plasmon absorption band for silver spherical nanoparticles suspended in water and ethylene glycol. Physica E: Low-dimensional Systems and Nanostructures, 2005 Vol. 27, No. 1 – 2, pp. 104 – 112. https://doi.org/10.1016/j.physe.2004.10.014
El-Said M., Bhuse V., Arendsen A. An empirical study to investigate the effect of air density changes on the DSRC performance. Procedia computer science, 2017, Vol. 114, pp. 523 – 530. https://doi.org/10.1016/j.procs.2017.09.025
Won H.I., Nersisyan H., Won C.W., Lee J.M., Hwang J.S. Preparation of porous silver particles using ammonium formate and its formation mechanism. Chemical Engineering Journal, 2010, Vol. 156, No. 2, pp. 459 – 464. https://doi.org/10.1016/j.cej.2009.10.053
Fujasova‐Zednikova M., Vobecka L., Vejrazka J. Effect of solid material and surfactant presence on interactions of bubbles with horizontal solid surface. The Canadian Journal of Chemical Engineering, 2010, Vol. 88, No. 4, pp. 473 – 481. https://doi.org/10.1002/cjce.20326
Downloads
Жарияланды
How to Cite
Журналдың саны
Бөлім
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc-nd/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.