ENHANCING THE DURABILITY OF ROBOTIC ARM USING COMPOSITE MATERIALS AND ADDITIVE MANUFACTURING IN HARSH ENVIRONMENTAL CONDITIONS

R. Askaruly; T. Faizulla; M. Abylkanov; A.B. Syzdykov; K. Sakhanov

doi:10.31489/2025N3/91-100

Authors

DOI:

https://doi.org/10.31489/2025N3/91-100%20

Keywords:

Computer-Aided Design, Printed Circuit Board, Computer-Aided Manufacturing, Computer-Aided Engineering, Telecommunications Relay Service, Fused Deposition Modeling

Abstract

Despite the harsh environmental conditions, such as strong winds, radiation exposure and frequent forest fires, pose serious challenges for the reliable operation of robotic systems. Despite growing interest in robotics for disaster relief and hazardous operations, the durability of additively manufactured components under such stresses remains insufficiently explored. This study investigates the use of composite materials and additive manufacturing techniques to improve the performance of robotic manipulators in harsh conditions. A modular rover equipped with a robotic arm made entirely of composite elements was developed and tested. The research focused on evaluating the structural reliability of PETG plastic and carbon fiber in terms of thermal exposure, static load, and radiation resistance. The study also presented a gesture-controlled interface for remote control and produced a functional prototype. The results of the study provide new insights into material selection and design strategies for sustainable robotic systems, contributing to the development of sustainable robotics in harsh environmental conditions.

References

Torrado A.R., Roberson D.A. (2016) Failure analysis and mechanical characterization of 3D printed ABS and PLA filaments as a function of raster orientation. Additive Manufacturing, 6, 16 – 29. https://doi.org/10.1016/ j.addma.2015.12.007

Spoerk M., Gonzalez-Gutierrez J., Sapkota J., Schuschnigg S., Holzer C. (2017) Effect of the printing bed temperature on the adhesion of parts produced by fused filament fabrication. Journal of Applied Polymer Science, 134(42), 1–9. https://doi.org/10.1002/app.45303

Han Y., Sun J., Liu Y., Liu J., Li H. (2012) Radiation effects on the thermal and mechanical properties of thermoplastic polymers. Radiation Physics and Chemistry, 81(12), 1923–1927. https://doi.org/10.1016/j.radphyschem. 2012.08.004

Czarnecka-Komorowska D., Giełżecki J., Białas S. (2020) Properties and applications of PETG in additive manufacturing. Polymers, 12(12), 1–15. https://doi.org/10.3390/polym12122937

Lin K.C., Chen S.C., Wu C.S., Lin J.J. (2015) Gamma radiation resistance and mechanical properties of PETG and PLA-based polymers. Journal of Applied Polymer Science, 132(36), 1–8. https://doi.org/10.1002/app.42436

Li H., Zhang X., Wang B., Wang Y. (2019) High-temperature mechanical performance of carbon fiber reinforced composites. Composites Science and Technology, 182, 107 – 115. https://doi.org/10.1016/j.compscitech. 2019.107703

Jakubczyk K., Szewczyk A., Plichta W., Gajewska H., Ławniczak M. (2019) Additive manufacturing for extreme environments: Radiation resistance of polymers and composites. Additive Manufacturing, 60, 377 – 381. https://doi.org/10.1007/s00411-021-00892-z

Alfuraih A., Kadri O., Fakhouri F. (2023) The effect of high-intensity gamma radiation on PETG and ASA polymer-based fused deposition modelled 3D printed parts. Journal of Materials Science, 207, 111256. https://doi.org/10.1016/j.msea.2024.114256

Špitalská G., Hnatková P., Matějková J., Jirka I., Vovk M., Plichta R., Růžička J., Kočí D., Mičová E., Sedláček P. (2023) Quantitative structural investigation of thermal stability of carbon materials in air. Carbon, 206, 211 – 225. https://doi.org/10.1016/j.carbon.2023.01.119

Li W., Guo S., Giannopoulos I.K., He S., Liu Y. (2010) Strength and stiffness of composite laminates. Composites Part B: Engineering, 236, 111916. https://doi.org/10.1016/j.compositesb.2019.107703

Dodds N., Gibson A.G., Dewhurst D., Davies J.M. (2002) Fire resistance of a carbon fiber reinforced epoxy composite. Composites Part A: Applied Science and Manufacturing, 31(7), 689–702. https://doi.org/10.1016/S1359-835X(00)00154-2

Mohamed N., Mustafa M.B. (2021) Gesture recognition: A review of the hand gesture recognition system-current progress and future directions. IEEE Access, 9, 157422–157436. https://doi.org/10.1109/ACCESS.2021.3132223

SparkFun Electronics (2021) Flex Sensor Tutorial. Available at: https://learn.sparkfun.com/tutorials/flex-sensor-hookup-guide/all (accessed: 5 September 2025).

Hu W., Li Y., Liu S. (2023) Current designs of robotic arm grippers: A comprehensive systematic review. Robotics, 12(1), 5–37. https://doi.org/10.3390/robotics12010005

ENHANCING THE DURABILITY OF ROBOTIC ARM USING COMPOSITE MATERIALS AND ADDITIVE MANUFACTURING IN HARSH ENVIRONMENTAL CONDITIONS