Study of phase transformations in ferroelectrics based on calcium titanate
DOI:
https://doi.org/10.31489/2021-No3/5-10Keywords:
calcium titanate, phase transformations, perovskites, ferroelectrics, crystallinity degreeAbstract
"The aim of this work is to study phase transformations kinetics in ferroelectrics based on calcium titanate. The relevance of this study is in the assessment of new methods for obtaining complex phase composition ferroelectrics, which have the potential for application in microelectronics, photocatalysis, and power engineering. The methods of scanning electron microscopy and X-ray diffraction were used as the main methods of analysis. Analysis of morphological features made it possible to establish the kinetics of changes not only in grain sizes, but also in their geometry. During the studies of phase transformations, the following dependence of the TiO2 – anatase/CaTi2O4 → TiO2– anatase /CaTi2O4/CaTiO3 → CaTiO3/TiO2 – rutile type was established depending on the annealing temperature. At the same time, at a temperature of 1000°C, a stable structure of ceramic with a perovskite-like structure of the CaTiO3 type and a high structural ordering degree (more than 92%) is formed. "
References
"1 Yan, Yuxiang, et al. Design of ternary CaTiO3/g-C3N4/AgBr Z-scheme heterostructured photocatalysts and their application for dye photodegradation. Solid State Sciences, 2020, Vol. 100, pp.106102-106110.
Wang, Dawei, et al. Cold sintered CaTiO3-K2MoO4 microwave dielectric ceramics for integrated microstrip patch antennas. Applied Materials Today, 2020, Vol. 18, pp. 100519.
Kadam, A. R., et al. Thermoluminescence study and evaluation of trapping parameters CaTiO3: RE (RE= Eu3+, Dy3+) phosphor for TLD applications. Journal of Molecular Structure. 2021, Vol. 1225, pp. 129129.
Soltani, Tayyebeh, et al. Effect of transition metal oxide cocatalyst on the photocatalytic activity of Ag loaded CaTiO3 for CO2 reduction with water and water splitting. Applied Catalysis B: Environmental. 2021, Vol. 286, pp. 119899.
Dai, Fangxu, et al. ZnIn2S4 modified CaTiO3 nanocubes with enhanced photocatalytic hydrogen performance. International Journal of Hydrogen Energy. 2020, Vol 45.53, pp. 28783-28791.
Lanfredi S., et al. K-and Cu-doped CaTiO3-based nanostructured hollow spheres as alternative catalysts to produce fatty acid ethyl esters as potential biodiesel. Applied Catalysis B: Environmental. 2020, Vol. 272, pp. 118986.
Zhang, Jiawei, et al. Enhanced energy storage performances of CaTiO3-based ceramic through A-site Sm3+ doping and A-site vacancy. Journal of the European Ceramic Society. 2021, Vol. 41.1, pp. 352-359.
Yatish, K. V., et al. Ochrocarpus longifolius assisted green synthesis of CaTiO3 nanoparticle for biodiesel production and its kinetic study. Renewable Energy. 2020, Vol. 147, pp. 310-321.
Chen, An-Nan, et al. Enhanced densification and dielectric properties of CaTiO3-0.3 NdAlO3 ceramics fabricated by direct coagulation casting. Journal of the European Ceramic Society. 2020, Vol. 40.4, pp. 1174-1180.
Liu, Hao, and Sufang Wu. In situ preparation of CaTiO3 and its effect on CO2 sorption performance of nano-CaO–CaTiO3 adsorbent. Environmental Technology. 2020, pp. 1-11.
Pei, Jingyuan, et al. Effects of Ca/Ti ratio on morphology control and photocatalytic activity of CaTiO3/Ca (OH) 2 composite photocatalyst. Materials Letters. 2020, Vol. 276, pp. 128229.
Rizwan, Muhammad, et al. Electronic and optical behaviour of lanthanum doped CaTiO3 perovskite. Materials Research Express. 2020, Vol.7.1, pp. 015920.
Zhang, Yanni, et al. Enhanced osteogenic differentiation of osteoblasts on CaTiO3 nanotube film. Colloids and Surfaces B: Biointerfaces. 2020, Vol.187, pp.110773.
Vasconcelos, S. J. T., et al. High thermal stability and colossal permittivity of novel solid solution LaFeO3/CaTiO3. Materials Chemistry and Physics. 2021, Vol.257, pp. 123239.
Yadi, Minoo, et al. CaTiO3/α-TCP coatings on CP-Ti prepared via electrospinning and pulsed laser treatment for in-vitro bone tissue engineering. Surface and Coatings Technology. 2020, Vol.401, pp. 126256.
Yin, Qian, et al. Enhancements of luminescent properties of CaTiO3: Dy3+, Pr3+ via doping M+=(Li+, Na+, K+). Materials Letters. 2020, Vol.266, pp. 127488.
Li, Shuiping, et al. Improvement of photovoltaic performance of perovskite solar cells by interface modification with CaTiO3. Journal of Power Sources. 2020, Vol.449, pp. 227504.
Zdorovets, M.V., Kozlovskiy A.L. The effect of lithium doping on the ferroelectric properties of LST ceramics. Ceramics International. 2020, Vol.46.10, pp. 14548-14557.
Dimza, Vilnis, et al. Effects of Mn doping on dielectric properties of ferroelectric relaxor PLZT ceramics. Current Applied Physics. 2017, Vol.17.2, pp. 169-173.
Zdorovets, M.V., Kozlovskiy A.L. Study of the effect of La3+ doping on the properties of ceramics based on BaTiOx. Vacuum, 2019 Vol.168, pp. 108838.
Kozlovskiy A.L., et al. Synthesis, phase composition and structural and conductive properties of ferroelectric microparticles based on ATiOx (A= Ba, Ca, Sr). Ceramics International. 2019, Vol. 45.14, pp. 17236-17242.
Popov, A.I., Balanzat E. Low temperature X-ray luminescence of KNbO3 crystals. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 2000, Vol.166, pp. 305-308.
Jumpatam, Jutapol, et al. Influences of Sr2+ Doping on Microstructure, Giant Dielectric Behavior, and Non-Ohmic Properties of CaCu3Ti4O12/CaTiO3 Ceramic Composites. Molecules. 2021, Vol.26.7, pp. 1994.
Klotins, E., Popov, A.I., Pankratov, V., Shirmane, L., Engers, D. Numerical evidences of polarization switching in PMN type relaxor ferroelectrics. Integrated Ferroelectrics, 2011, Vol. 123(1), pp. 32–39.
Grigorjeva, L., et al. Luminescence properties of KNbO3 crystals. Journal of luminescence. 1997, Vol.72, pp. 672-674.
Li, Runrun, et al. Thickness-dependent and tunable mechanical properties of CaTiO3 dielectric thin films determined by nanoindentation technique. Ceramics International. 2020, Vol. 46.14, pp. 22643-22649.
Abdul Kareem, et al. Effect of annealing temperatures on the structural and crystalline properties of CaTiO3 powder synthesized via conventional solid-state method. Materials Today: Proceedings. 2021, Vol.42, pp. 2674-2679.
Savchyn V.P., et al. Cathodo-luminescence characterization of polystyrene-BaZrO3 hybrid composites. Low Temperature Physics. 2016, Vol.42.7, pp. 597-600.
Yang, Liu, et al. Intense and recoverable piezoluminescence in Pr3+-activated CaTiO3 with centrosymmetric structure. Applied Physics Letters. 2021, Vol.118.5, pp. 053901.
Sasidharan, Sajesh, G. Jyothi, and K. G. Gopchandran. Solution combustion synthesis and luminescence dynamics of CaTiO3: Eu3+, Y3+ nanophosphors. Journal of Luminescence. 2021, Vol. 235, pp. 118048.
"
