INVESTIGATION OF LAYERED ORTHOTROPIC STRUCTURES BASED ON ONE MODIFIED REFINED BENDING THEORY
DOI:
https://doi.org/10.31489/2021No4/37-44Keywords:
orthotropic materials, layered composites, layered (or laminated) orthotropic plate, refined bending theory, transverse shear, deflection, strain, asymmetry, multilayer structure, finite difference methodAbstract
In the article, constructions made of orthotropic multilayer composite material, in particular, layered orthotropic plates are considered. Numerical modeling and analysis of the stress-strain state for the plates are carried out on the basis of one version for the refined theory of layered plates. The bending problems for plates of medium thickness and thin multilayer plates of symmetric and asymmetric structures are investigated. All studies are conducted taking into account the properties of orthotropy and multilayering for the composite material from which the plates are made. The general algorithm for the numerical calculation of the stress-strain state for layered plates with orthotropic layers is developed on the basis of the finite difference method. This algorithm is implemented on a PC by a software package.
References
"1 Bozhenov A.Sh. Theory of multilayer inhomogeneous plates, orthotropic shells and plates. Abstract of the dissertation of the doctor of technical sciences, Novosibirsk, 1990, 45 p. [in Russian]
Kasimov A.T. Investigations of the stress-strain state for rectangular multilayer plates by the finite difference method. Proceedings of the University, 2002, No. 4, pp. 73 - 75. [in Russian]
Pagano N.J., Hatflied S.J. Elastie behavior of multilayered bidirectional composites. American Institute of Aeronautics and Astronautica Journal, 1972, Vol. 10, No. 7. р. 931 - 933.
Gorodetsky A.S., Zavoritsky V.I., Lantukh-Lyashchenko A.I., Razkazov A.O. Automation of calculations of transport facilities. Moscow, 1989, 232 p. [in Russian]
Alexandrov A.Ya., Bryukker L.E., Kurshin L.M., Prusakov A.P. Calculation of three-layer panels. Leningrad, 1960, 272 p. [in Russian]
Grigolyuk E.I., Kulikov G.M. Ways of developing the theory of elastic multilayer plates and shells. Bulletin of TSTU, 2005, Vol. 11, No. 2A, pp. 439 - 448. [in Russian]
Annin B.D., Volchko Yu.M. Non-classical models of the theory of plates and shells. Applied Mechanics and Technical Physics, 2016, Vol. 57, No. 5, pp. 5 - 14. [in Russian]
Kasimov A.T. To the application of FDM for the calculation of layered plates taking into account shear strains along its thickness. Proceedings of the University, 2018, No. 3, pp. 100 - 103. [in Russian]
Piskunov V.G., Rasskazov A.O. Development of the theory of layered plates and shells. Applied Mechanics, 2002, Vol. 38, No. 2, pp. 22 - 28. [in Russian]
Bakulin V. Methods for optimal design and calculation of composite structures. Moscow, 2008, Vol.1, 256 p. [in Russian]
Popov B.G. Calculation of multilayer structures by variational matrix methods. Moscow, MSTU, 1993, 294 p. [in Russian]
Alfutov N.A., Zinoviev P.A., Popov B.G. Calculation of multilayer plates and shells made of composite materials. Moscow, 1984, 264 p. [in Russian]
"
