Potential difference of metal machine parts methodology for determining the parameters of adhesional properties of materials on the SMC-2 friction machine
DOI:
https://doi.org/10.31489/2019No2/78-82Keywords:
tribosystem, adhesion, hardness, coefficient of friction, wear, contactAbstract
The paper develops the idea of the capabilities of a standard machine for testing materials for friction and wear SMC-2 to determine the parameters of the adhesive properties of materials. The results of experimental studies of tribological systems of materials “40Х - steel 45”, “12Х2Н4 - steel 45”, “45ХН2МФА - steel 45” are presented. The regularities of the change in the tangential strength of the molecular bond with increasing pressure in the contact, and the coefficients of its hardening during the interaction of the materials under consideration without lubrication are determined. It is shown that in order to reproduce the contact interaction of the operational surfaces of real friction units, it is possible to simulate their shear during deformation provided that full-size fragments placed in regular places of the SMC machine are used. In this case, the equipment of the SMC machine requires minor refinement, which allows us to simulate the shear rate of surfaces as well.
References
"1 Semenov V.I., Shuster L.Sh., Chertovskikh S.V., Raab G.I. Influence of the complex parameter of plastic frictional contact and material structure on the strength of adhesive bonds. Friction and Wear. 2005, Vol. 26, No. 1, pp. 74-79.
Dudikina V.V. Adhesion strength of nickel and zinc coatings with a copper base, electrodeposited under external stimulation by laser radiation. Science and transport progress. Newsletter of the Dnipro-petrovsk National University of Public Transport, 2013, V.2(44). - P. 83-91
Nazarov V.G., Stolyarov V.P., Gagarin M.V. Durability of adhesive rubber-metal adhesion joints for surface fluorinated rubbers. News of higher educational institutions. Problems of printing and publishing. Moscow, MGUP named after Ivan Fedorov. 2013, No.3. - P.45-53
Kotomin S.V. Evaluation of the strength of the adhesive bond fiber - thermoplastic matrix by the loop method. Engineering Journal: Science and Innovation, 2015, No. 12. Available at http://engjournal.ru /catalog/msm/pmcm/1426.html
Standard Test Method for Adhesion Coating Using Portable Adhesiometers. Designation: D 4541 - 02. Available at: www. inspector.pro/wp-content/uploads/2016/01/ASTMD4541.pdf
Kragelsky I.V., Dobychin M.N., Kombalov V.S. Bases of calculations for friction and wear. Moscow, Mechanical Engineering. 1977, 526 p.
Diha O.V. Calculation and experimental methods of control of processes of boundary lubrication of technical tribosystems. Monograph.Khmelnitsky, KhNU, 2018, 197 p.
"
